Portable Handheld Fiber Laser Cleaning Machine Handheld Fiber Laser Cleaner
Fiber Laser Cleaning Machine
Fiber Laser Cleaner
1500W 2000W 3000W Hand Held Portable Metal Automatic Fiber Laser Cleaner
Fiber Laser Welding Machine
Fiber Laser Cleaning Machine
Fiber Laser Cutting Machine
3 in 1 Fiber Laser Welding Machine
One machine have Welding + Cleaning + Cutting functions.
1.Standard Specifications Of RL-FLW-2000W
Main Specifications` |
Describe |
Unit |
Parameter |
Supply Power |
V/Hz |
220/50/60Hz |
Working time |
Hour |
24 Hours |
Total power |
KW |
11KW |
Weight |
KG |
300KG |
Laser source |
Raycus |
Raycus 2000W |
Cooling method |
|
Water cooling |
Indicating method |
|
Red light |
Cable length |
mm |
5000mm (Standard) |
Gas |
|
Argon/N2 |
Machine dimensions (L*W*H) |
mm |
1000MM*650MM*1250MM |
Wavelength |
nm |
1070 |
Laser power |
W |
2000W |
Through welding ability (One side) |
mm |
5MM Mildsteel,5MM Stainless |
2.Standard Configurations Of RL-FLW-2000W
Main Configurations |
Describe |
Unit |
Brand |
Laser Saurce |
Set |
Raycus China |
Water Chiller |
Set |
Hanli, China |
Portable Welding Hand |
Set |
Raylas, China |
Air Condition |
Set |
Xinliang, China |
Control System |
Set |
Raylas, China |
Electronic Components |
Set |
Schneider, Germany |
Gas System |
Set |
SMC,Japan |
3. Technical Parameters:
Laser Mode |
Six different modes |
Laser Power |
1500W |
2000W |
3000W |
Power Adjusting Range |
5-95% |
Laser Spot Range |
0.2mm-5mm |
Laser Frequency Range |
50-20KHz |
Laser welding wobble Frequency |
20-200HZ |
Fiber Length |
5 m |
Cooling Method |
Water cooling |
Power Supply |
AC 220V±10% ,50/60Hz |
4. Equipment Working Condition
Sub item |
Item |
Requirements |
Notes |
Power |
Laser Source |
6KW |
The total installed capacity is not less than 11KW, And this machine need very good ground line.
|
Chiller |
3KW |
Air Condition |
0.3KW |
Other accessories |
1KW |
Stability of 3-phase power |
380V±5% |
Instability of 3-phase power |
<2.5% |
Earthing |
<4Ohm |
Water |
Water for Chiller |
Distilled water without minerals |
Change every month |
Gas |
Welding Gas |
Ar/N2 |
The processing parameters |
Working |
Temperature requirements |
5-40 Degree |
|
Humidity requirements |
Less than 70% |
|
Foundation requirement |
There should be no vibration source nearby |
If there is a vibration source on site or nearby, the user is required to dig an anti-vibration trench around the foundation |
Work piece |
For CS and SS: quality surface and no rust |
|
5.Fiber Laser System
No lens built inside laser generator to avoid maintenance
Beam delivery system consists of fibers
Compact-design, easy for integration
Start-up time not needed
Excellent cutting capability
Good beam quality and high-power density
Fiber Laser Conversation Efficiency is more than 30%, compared with YAG or CO2 machine, it significantly saves power consumption when working, saving running costs and to achieve the highest production efficiency.
Fiber laser adopting Semiconductor Modular and Redundancy Design, there is no optical lens in resonant cavity like YAG, it doesn't need any start time, featuring free adjustment, free maintenance, high stability, reducing parts cost and maintenance time, which is incomparable by other traditional cutting machinery.
Operating Model |
CW |
CW |
Wave Length |
nm |
1070-1080 |
Standard output power |
w |
2000 |
Laser Beam Quality |
mm*mrad |
4 |
Adjustable Frequency |
Hz |
20-20KHZ |
Transmission Fiber Diameter |
um |
50/100 |
Stability of Output Power |
|
±2 |
power Supply |
VAC |
380-460 |
Power Consumption |
KW |
6 |
Working Temperature |
ºC |
5~35 |
The machine Optical is Fiber Transmission, it doesn't need complex reflect lens and other light system, the optical path is simple and stable structure, has free maintenance
Laser coupled with optical gate can be a plurality of machine, through the fiber light divided into multiple units at the same time, it's easy to expand function and upgrade. The life time is more than 100,0000 hours.
6.Fiber Laser Cleaning Head
Multiple safety alarms, smaller size, flexible operation and easy to use.
More stable: All parameters are visible, real time monitoring of the status of the whole machine, to avoid problems in advance,
more convenient to troubleshoot and solve problems, to ensure the stable operation of the welding head.
Process: All parameters are visible, the cleaning quality is more perfect.
Stable parameters and high repeatability: Greatly improve efficiency, while also reducing operator requirements.
Focus Lens F150, cleaning laser beam width can be 1mm to 30mm;
Focus Lens F400, cleaning laser beam width can be 1mm to 60mm;
Focus Lens F800, cleaning laser beam width can be 1mm to 120mm;
7.Fiber Laser Welding Head
- Switzerland imported laser welding head.
- Free switching of various light spot modes Quick and Convenient part changing.
- Built-in dual-axis high-speed servo motor.
- Digital display design, grasp welding data in real time.
- Circulating water circuit design, rapid cooling of the gun body.
- The overall structure of the welding torch is ergonomically designed.
- Imported high-end chips, multiple security protection measures.
- All ports on the motherboard can withstand 20W volts of static electricity.
The laser cutting head is very easy to operate, the total weight is just 6.3KG. The operator easy to hold and do any metal parts welding.
Quick and Convenient Parts Changing: The laser head belongs to module design product, it is easy to install and disassemble, if you need to change lens or any part, it is very convenient to operate.
Fiber Laser Welding Nozzle Types
8. Water Chiller and Gas Way for Fiber Laser Cleaning Machine
- The laser resonator, laser cutting head and other key components all get sufficient cooling to ensure machine's smooth and safety running.
- Adopt dual temperature control, which is precise, stable and reliable, able to set and maintain constant temperature
- The chillers have comprehensive protection functions of over-temperature, phase-loss, over-pressure, water-shortage, low-voltage, overload and so on. Since all the
key-components and parts are imported, the chiller has the
advantages of high stability, easy-maintenance and being in
line with the cooling indicator requirement of the laser
source and optical path.
The water pipe and gas pipe interface can be installed with a hose with outer
diameter 6mm inner diameter 4mm. Access and exit pipeline of waterway (regardless
of entry and exit direction)
The cooling system is divided into waterway section of welding head and waterway
section of optical fiber head
9. Fiber Laser Cleaning Software
Parameter serial number: We can preset about 20 groups of welding parameters according to different materials. Just need to press the up and down button to choose the parameter.
Power: The output power of the laser. The adjustment range is between 10%-100%, and the common welding range is between 50%-100%.
Frequency: Laser output speed. The adjustment range is between 50Hz-20KHz, and the common welding range is between 50-200HZ.The common cutting range is between 1000HZ-5000HZ.
Duty cycle: The ratio of the duration and total time with the laser beams in one cycle. The common welding range is between 40%-80%.
10. Fiber Laser Cleaning and Welding Samples
11. Fiber Laser Welding Machine in Factory
FAQ
1. Do you have the CE certificate and other documents for customs clearance?
A: Yes, we have the certificates and documents for exporting.
We will provide you the commercial invoice, packing list, Bill of Lading and other relevant documents for buyers.
2. Payment terms?
A: TT/West Union/Paypal/LC/Cash and so on.
3. What's the max. cleaning wildth?
A: Cleaning wildth is related to laser power and focus lens specification.
Please tell us what material and size do you want to clean by fiber laser cleaning machine.
Focus Lens F150, cleaning laser beam width can be 1mm to 30mm;
Focus Lens F400, cleaning laser beam width can be 1mm to 60mm;
Focus Lens F800, cleaning laser beam width can be 1mm to 120mm.
4. Which kind of materials can be processed on this machine?
A: Laser cleaning machine can clean Stainless Steel, Carbon Steel, Mild Steel, Steel Sheet and Steel Tubes, Aluminum, Copper, Brass, and so on.
5. How long is the delivery time?
A: For standard machines, it will be 5-10 days;
For non-standard machines or customized machines according to the client's specific requirements, it will be 15 to 30 days.
6. Can you customize fiber laser cleaning machine according to our products?
Yes, we can customize fiber laser cleaning machine according customers' requirements.
If you want to know more, please feel free to contact us, we will reply you asap.