Chaoqiang Weiye Laser Welding Head Protective Lens D30t3 Laser Consumables Cqwy Sup25A Sup26A

Product Description

Fiber Laser Protective Lens upper Protection Lens for Fiber Laser Cutting Machine Head Accessories Spare Parts

 

The Importance of Protecting Lenses for Laser Cutting Machines:

The protective lens of laser cutting machine is also called focusing lens of laser cutting machine. The focusing lens of laser cutting machine is a relatively precise optical element. The protective lens of laser cutting machine is very important for laser cutting machine, and its cleanliness directly affects the quality of laser cutting machine. Machinability and quality. Improper selection of lenses will result in large laser loss, frequent damage to protective lenses, unstable product quality, and serious losses to enterprises. Although the protective lens of the laser cutting machine is a wearing part, in order to improve its utilization rate and reduce the production cost, the protective lens can be cleaned regularly to achieve the purpose of reuse. Therefore, the protective lens of the laser cutting machine should be maintained frequently, and the maintenance precautions of the focusing lens of the laser cutting machine:

 

1. The material of the focusing lens is ZnSe (zinc arsenic), which is relatively brittle and is afraid of falling; pay attention when disassembling and assembling: do not use too much force or collide with hard objects. There is an anti-reflection coating on the surface, which is afraid of pollution, moisture, oiliness, and scratches; therefore, it is required to provide dry and degreasing air during work, and do not directly handle the lens of the laser cutting machine focusing lens by hand, because the skin is oily. Permanent damage to the lens surface. Instead, you can operate with gloves and their special kits. For smaller lenses, it is more convenient to use optical tweezers or vacuum tweezers. No matter what method is used to clamp the laser cutter focusing mirror, it should only be clamped along non-optical surfaces, such as the frosted edge of the mirror plaque.

 

2. In general, the condition of the focusing mirror of the laser cutting machine needs to be checked before use and before and after cleaning. Because of the small size of most contaminants and surface defects, magnification equipment is often required when inspecting lenses. In addition to magnifying the device, sometimes we need to illuminate the optical surface with a brighter light to enhance the specular intensity of surface contamination and defects, which can make them easier to spot.

 

3. When cleaning a laser cutter focusing mirror, always use clean wipes and optical grade solvents to prevent damage by other contaminants. The wipes must be moistened with a suitable solvent and must not be used dry. In consideration of softness, the available wipes are pure cotton Webril wipes or applicators such as cotton balls, lens tissue, and cotton swabs.

 

The focusing lens of the laser cutting machine is a consumable item. When the cleanliness cannot be achieved after many times of cleaning, it needs to be replaced to ensure the processing efficiency of the laser cutting machine, so as not to delay the production.

 

Double-sided Coating:
This laser cutting machine protective lens adopts excellent coating technology, both sides are coated with high damage threshold penetration enhancement film, which reduces the loss due to reflection and protects it from spatters and other hazards.
High Transmission:
This laser cutting machine protective lens is designed with clear and high transmission, with good light transmission and abrasion resistance, the light transmission rate is as high as 99.9%, which can realize efficient laser beam transmission and clear working vision.
Safety and Ease of Use:
This laser cutter protective lens adopts humanized 0.5mm 45 degree protective full angle design, easy to apply, not easy to hurt hands, compatible with WSX laser cutting equipment.
High Quality and Durable:
This laser cutting machine protective lens is made of imported quartz crystal material, with uniform texture, excellent durability and high temperature resistance, which can withstand the harsh conditions of laser processing, and the lens is not easy to be chipped or cracked.
Exquisite workmanship:
The laser cutting machine protective lenses are made of excellent substrate with excellent optical performance, strong laser resistance, good thermal stability, and are finely processed through slicing, polishing, grinding and other high-precision processes.

Specification: 

Item	Power	Size
Upper protective lens	below 4000w	22.35*4mm
	below 4000w	24.9*1.5mm
	below 4000w	30*5mm
	4000w-15000w	21.5*2mm
	4000w-15000w	24.9*1.5mm
	4000w-15000w	24.4*4mm
	4000w-15000w	25.4*4mm
	4000w-15000w	32*2mm
	4000w-15000w	32*5mm
	4000w-15000w	37*1.6mm
	4000w-15000w	38.1*1.5mm
Lower protective lens	below 4000w	30*4mm
	below 4000w	30*5mm
	below 4000w	22.35*4mm
	below 4000w	27.9*4.1mm
	below 4000w	24.9*4.1mm
	10000W	30*5mm
	10000W	27.9*4.1mm
	6000W	34*5mm
	15000W	34*5mm
	20000W	34*5mm
	30000W	34*5mm
	40000W	34*5mm
	10000W	37*7mm
	15000W	37*7mm
	20000W	37*7mm
	30000W	37*7mm
	40000W	37*7mm
collimation lens	3000w	D30F75 thin/thick
	3000w	D30F100
	3000-15000w	D37F100 Aspherical
	3000-15000w	D37F100 thin/thick
focus lens	3000w	D30F125
	3000w	D30F150 thin/thick
	3000w	D30F155
	3000-15000W	D37F150 thin/thick
	3000-15000W	D37F200 thin/thick

 

Boci Laser Head:

Raytools Laser Head:

Precitec Laser Head:

WSX Laser Head:

BM111 Auto Focus Laser Cutting Head
Power rating 3KW; Standard auto focus laser cutting.

BM111 Laser Head Features:
1. Modular design with easy maintenance.
2. Dual water cooling circuits.
3. Auto focus to reduce human intervention and improve piercing and cutting efficiency.
4. 3 Cover glasses (top, middle and bottom) to protect collimation & focus lens.
5. IP65 class dustproof, patented cover glass cover plate. All-around dust prevention.



BM06K Auto Focus Laser Cutting Head
Power rating 6KW; Standard auto focus laser cutting.

BM06K Laser Head Features:
1. Cooling structure for both collimation module and focus module,and cooling to nozzle which effectively protects the nozzle &ceramic part and extends the lifespan.
2. 4 cover glasss designed to effectively decrease contamination risk during replascement of fiber & cover glass and extend the lifespan of collimation lens and focus lens.
3. Auto focus by moving collimation lens to achieve higher speed and bigger auto focus range
4. Momitoring to temperature of bottom cover glass could be accessed at mobile APP or computer desktop in real-time.Alarm output for overheating to protect the optical path system effectively.
5. Integrated design to ensure sealing.Improved fiber interface(QBH,QD,G5) to benefit their compatiblility of lasers and prevent from being stuck for leaks and rusts.



BS12K All-In-One Smart Laser Cutting Head (International Model)
Power rating 12KW; Fully smart sensor technology with real-time status monitoring by APP or CNC; Auto focus by 0-10V or EtherCAT.
1.Auto focus control via 0-1OV or EtherCAT
2.Imported aspherical lens.
3.4-Color LED lamps to monitor interior status
4.Optimized X/Y alignment knob to facilitate beam alignment.
5.Real-time status of cutting head could be accessed at mobile APP or CNC controller.
6.Real-time monitoring to temperature of top/bottom cover glass, focus lens and cavity
7.Real-time monitoring to focus position and ready status of bottom cover glass
8.Real-time monitoring to cutting gas pressure and cavity pressure.
9.Patented water cooling design of nozzle assembly.  
10.Standard QD/Q+/LOE interfaces to work with different fiber lasers


BS15K All-In-One Smart Laser Cutting Head (International Model)
Power rating 15KW; Fully smart sensor technology with real-time status monitoring by APP or CNC; Auto focus by 0-10V or EtherCAT.

BS15K Laser Head Features:
1.Auto focus control via 0-1OV or EtherCAT
2.Imported aspherical lens.
3.4-Color LED lamps to monitor interior status
4.Optimized X/Y alignment knob to facilitate beam alignment.
5.Real-time status of cutting head could be accessed at mobile APP or CNC controller.
6.Real-time monitoring to temperature of top/bottom cover glass, focus lens and cavity
7.Real-time monitoring to focus position and ready status of bottom cover glass
8.Real-time monitoring to cutting gas pressure and cavity pressure.
9.Patented water cooling design of nozzle assembly.  
10.Standard QD/Q+/LOE interfaces to work with different fiber lasers


Fiber Laser Head or Spare Parts Delivery
We can delivery the laser cutting head or spare parts by express delivery or by train or by ship.


FAQ

Q: I don't know which laser cutting head is suitable for our machine?
A :Just tell us below informations
1. If you want to purchase a new laser cutting head to install on your new machine, please tell us the laser source power for your laser cutting machine?
2. If you want to purchase a new laser cutting head to replace the old laser head on your machine, please send us the old laser head pictures.

Q: I don't know how to install the laser head after we received it, what should we do?
A: We can provide online support such as team viewer/Whatsapp/Email/Phone/Skype.
We can also provide on site service if you need.
Our professional engineers will support you in time.
 

If you want to know more, please feel free to contact us, we will reply you asap.